Strawberry Ninja Creami without protein powder
|

Strawberry Ninja Creami (No Protein Powder)

This Strawberry Ninja Creami is creamy, fruity, and made without protein powder. It’s an easy way to make a low-calorie, high-protein strawberry frozen treat using just five simple ingredients.

I designed this recipe to work both as a complete strawberry pint on its own and as a foundational base for mix-ins and toppings. You can enjoy the entire pint as-is or add cookies, cereal, chocolate, fruit, or other toppings.

Like all of my recipes, this one is Made for the Whole Pint. The entire finished pint follows my 400 / $4 / 4 Rule: under 400 calories, under $4 in ingredients, and under 4 minutes of active prep time.

Why You’ll Love This Strawberry Ninja Creami

Frozen strawberries add real strawberry flavor and natural sweetness while keeping the pint light and refreshing. Combined with Kroger CarbMaster Fat Free Milk, the entire pint comes to just 157 calories with 20 grams of protein, without adding protein powder.

It’s a simple five-ingredient base that gives you real fruit in every pint while still leaving plenty of flexibility for mix-ins and toppings.

Ingredients & Substitutions

This strawberry Ninja Creami uses just five ingredients: Kroger CarbMaster Fat Free Milk, frozen unsweetened strawberries, zero-calorie sweetener, xanthan gum, and salt.

I use Kroger CarbMaster Fat Free Milk because it provides a lot of protein for relatively few calories. Fairlife Fat Free Ultra-Filtered Milk can be substituted 1:1, although nutrition and cost will vary depending on the milk used.

I use frozen unsweetened strawberries for the strawberry flavor. Fresh strawberries can also be used, but the final flavor, texture, nutrition, and cost may vary.

I use a zero-calorie sweetener to add sweetness without increasing the calories. You can use your preferred zero-calorie granulated sweetener, although sweetness can vary between products.

Xanthan gum helps thicken the base and creates a smoother texture after processing. A small amount of salt helps balance the sweetness and bring out the strawberry flavor.

Top-down view of Strawberry Ninja Creami without protein powder

Variations

Strawberry Golden Oreo

Turn this strawberry base into a Strawberry Golden Oreo Ninja Creami by crumbling 3 Golden Oreo Thins over the finished pint after processing. The entire finished pint is 262 calories with 21 g protein and costs about $2.55.

See the full Strawberry Golden Oreo variation below the recipe card for nutrition, cost, and instructions.

Tips for the Best Strawberry Ninja Creami (No Protein Powder)

Blend the base ingredients thoroughly before freezing. I recommend an immersion blender because it is quick, easy to clean, and does a great job combining the strawberries, sweetener, and xanthan gum evenly. A regular blender can also work well. A handheld milk frother or shaker cup may help combine the liquid ingredients, but a blender or immersion blender is recommended for breaking down the strawberries. Blend for about 30–60 seconds, making sure the strawberries are smooth and all ingredients are fully combined before freezing.

Make sure the blended mixture stays below the MAX FILL line before freezing. A small amount of foam above the line is okay, provided the actual liquid mixture stays below it once the foam settles. If the mixture exceeds the line, reduce the ingredient amounts proportionally before freezing.

Freeze time can vary depending on your freezer temperature, but I recommend 24 hours to be safe and help ensure the pint is fully frozen. Freeze the pint on a level surface with the lid removed to help prevent a bump from forming.

Before spinning, check that the frozen surface is level and does not have a raised bump. Do not process a pint with a significantly uneven frozen surface. If necessary, allow the mixture to soften or melt, smooth it out, and refreeze it on a level surface until completely solid.

Before spinning, let the pint sit on the counter for about 15 minutes or run hot water over the outside of the container for about 1 minute.

Process using the Lite Ice Cream setting. After the first cycle, check the texture. If it still needs significant processing, run a Re-Spin. If it is already close to the texture you like and you plan to add mix-ins, you can skip the Re-Spin and go directly to the Mix-In cycle. If you are enjoying the pint as-is and it has reached your preferred consistency, no additional processing is needed.

If the mixture is especially dry or powdery, try a Re-Spin first. If it still needs additional moisture, add a small splash of water before another Re-Spin. Avoid adding too much liquid at once, as it can make the finished ice cream softer than intended.

If you are adding mix-ins, make a hole slightly off-center with a butter knife, add your ingredients, and run the Mix-In cycle. I prefer freezing mix-ins ahead of time when practical so they hold up better during processing. Add any toppings after processing.

Strawberry Ninja Creami texture on a green spoon

What to Do About Icy Sides

A thin icy layer around the sides of the pint after the first spin is normal because the blade does not reach the very edge of the container. Avoid scraping the icy sides into the creamy center before running another cycle.

Once you’re finished processing, you can push the icy layer toward the bottom so it softens while you eat from the top. Another option is to enjoy the creamy center first and let the icy sides soften as you eat.

How to Store Leftover Ninja Creami

If you do not finish the entire pint, smooth the remaining ice cream into a level surface, replace the lid, and return it to the freezer.

When you’re ready to enjoy the leftovers, allow them to soften slightly or process them again using the appropriate setting for your Ninja Creami model if needed. Keep in mind that additional processing may further break down any mix-ins.

Calories, Protein & Cost

The entire pint contains 157 calories, 20 g protein, 20 g carbs, and 0 g fat.

The approximate ingredient cost is $2.25 per pint.

Based on representative ingredient prices, here’s approximately what each ingredient costs for one pint:

Cost Breakdown

Nutrition is calculated for the entire pint using the specific ingredients listed. Ingredient costs are estimates based on representative prices. Substitutions may change both nutrition and cost, and actual prices will vary by store and location.

IngredientAmountCost
Kroger Carbmaster Fat Free Milk355 g$0.98
Frozen Unsweetened Strawberries100 g$0.70
Monk Fruit In The Raw36 g$0.52
Xanthan gum1 g$0.04
Salt1 g$0.01
Total Cost Per Pint$2.25

Costs are estimates based on representative prices for the specific ingredients listed. Actual costs may vary by store, location, package size, and current pricing.

Watch This Ninja Creami Recipe

Strawberry Ninja Creami (No Protein Powder)

A creamy and fruity Strawberry Ninja Creami made without protein powder using just five simple ingredients. The entire pint has 157 calories and 20 grams of protein.
Prep Time4 minutes
Freeze time1 day
Total Time1 day 4 minutes
Course: Dessert
Keyword: Healthy Ninja Creami recipe, low calorie Ninja Creami, Ninja Creami strawberry ice cream, strawberry Ninja Creami, strawberry ninja creami no protein powder
Servings: 1 pint
Calories: 157kcal
Author: Lucas Eats Creamis
Cost: $2.25

Equipment

  • 1 Ninja Creami
  • 1 Ninja Creami Pint
  • 1 Immersion Blender recommended for easy blending; a regular blender, handheld milk frother, or shaker cup can also work.

Ingredients

  • 355 g Kroger Carbmaster Fat Free Milk 1½ cups; Fairlife Fat Free Ultra-Filtered Milk can be substituted
  • 100 g Frozen Unsweetened Strawberries about ¾ cup; fresh strawberries can be substituted
  • 36 g Monk fruit sweetener or other zero calorie sweetener 3 tbsp; another zero-calorie granulated sweetener can be substituted
  • 1 g Xanthan gum about ¼ tsp
  • 1 g Salt about ¼ tsp

Instructions

  • Blend the base: Add the milk, strawberries, sweetener, xanthan gum, and salt to the Ninja Creami pint. Use an immersion blender to blend for about 30–60 seconds, until the fruit is smooth, the ingredients are fully combined, and no clumps remain. A regular blender can also work well. A handheld milk frother or shaker cup is not recommended because it may not break down the fruit adequately.
  • Freeze: Make sure the liquid mixture is below the max fill line. Place the pint on a level surface and freeze for at least 24 hours. Freeze with the lid removed to help prevent a bump from forming.
  • Prepare to spin: Remove the pint from the freezer and make sure the frozen surface is level, with no raised bump. Run hot water over the outside of the pint for about 1 minute or let it sit on the counter for about 15 minutes.
  • Spin: Process using the Lite Ice Cream setting.
  • Assess the texture: After the Lite Ice Cream cycle, check the texture. If it still needs significant processing, run a Re-Spin. If it’s already close to the texture you like, you can skip the Re-Spin and run the Mix-In cycle instead, whether or not you’re actually adding mix-ins.
  • Add mix-ins or enjoy: Enjoy as-is, or make a hole slightly off-center with a butter knife, add your mix-ins, and run the Mix-In cycle. Add any toppings after processing.

Notes

Nutrition per pint: 157 calories | 20 g protein | 20 g carbs | 0 g fat
Nutrition & cost: Nutrition is calculated for the entire pint using the specific ingredients listed. Ingredient costs are estimates based on representative prices. Substitutions may change both nutrition and cost, and actual prices will vary by store and location.
Milk: I use Kroger Carbmaster Fat Free Milk for its high protein content and low calories. Fairlife Fat Free Ultra-Filtered Milk can be substituted 1:1. Nutrition and cost will vary depending on the milk used.
Strawberries: I use 100 grams of frozen unsweetened strawberries for the strawberry flavor. Fresh strawberries can also be used, but the final flavor, texture, nutrition, and cost may vary.
Sweetener: I use Monk Fruit In The Raw to add sweetness without adding calories. Another zero-calorie granulated sweetener can be substituted, but sweetness may vary between products.
Xanthan gum: Xanthan gum helps thicken the base and creates a smoother texture after processing. I use 1 gram, or about ¼ teaspoon.
Salt: A small amount of salt helps balance the sweetness and bring out the strawberry flavor. I use 1 gram, or about ¼ teaspoon, as a consistent starting point. You can adjust the amount to taste.
Blending: I recommend an immersion blender because it is quick, easy to clean, and helps combine the ingredients evenly. A regular blender can also work well. A handheld milk frother or shaker cup may help combine the liquid ingredients, but a blender or immersion blender is recommended for breaking down the strawberries. Blend for about 30–60 seconds, making sure the strawberries are smooth and all ingredients are fully combined before freezing.
Max fill: Make sure the blended mixture stays below the MAX FILL line before freezing. A small amount of foam above the line is okay, provided the actual liquid mixture stays below it once the foam settles. If the mixture exceeds the line, reduce the ingredient amounts proportionally before freezing.
Freezing: Freeze time can vary depending on your freezer temperature, but I recommend freezing the pint for 24 hours to be safe and help ensure it is fully frozen before processing. Freeze the pint on a level surface. Before processing, make sure the frozen surface is level and does not have a raised bump. Do not process a pint with a significantly uneven frozen surface.
Processing: If the ice cream is especially dry or powdery after the first spin, try a Re-Spin before adding liquid. If it still needs additional moisture, add a small splash of water before another Re-Spin. Avoid adding too much liquid at once, as it can make the finished ice cream softer than intended.
Icy sides: A thin icy layer around the sides of the pint after the first spin is normal because the blade does not reach the very edge of the container. Avoid scraping the icy sides into the creamy center before running another cycle. Once you’re finished processing, you can push the icy layer toward the bottom so it softens while you eat from the top. Another option is to enjoy the creamy center first and let the icy sides soften as you eat.
Leftovers: If you do not finish the entire pint, smooth the remaining ice cream into a level surface, replace the lid, and return it to the freezer. When you’re ready to enjoy the leftovers, allow them to soften slightly or process them again using the appropriate setting for your Ninja Creami model if needed. Keep in mind that additional processing may further break down any mix-ins.

Nutrition

Calories: 157kcal | Carbohydrates: 20g | Protein: 20g

Strawberry Golden Oreo Variation

Make the Strawberry Ninja Creami according to the recipe above. After processing, crumble 3 Golden Oreo Thins over the finished pint.

Entire finished pint: 262 calories | 21 g protein | 36 g carbs | 5 g fat

Approximate ingredient cost: $2.55 per pint.

Want to Build Your Own Variation?

Use Build Your Own Pint to customize your Ninja Creami with different toppings and see the calories, macros, and estimated cost before you make it.

More Creami Recipes

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe Rating